Labeling machine definition:
Film machine is dedicated to the electronics / communications / semiconductor industry, such as protective film and anti-riot film, to ensure that no bubbles without scratch film.
Film machine works:
The self-adhesive part of the tape is drawn to the stripping plate under the suction device of the drive device and is self-adhesive under the lead, and is automatically peeled off by a series of tensioning devices after automatic mechanical adjustment. Mounted on a workpiece with a fixture.
Film machine features:
Self-adhesive parts of the automatic placement machine, equipment, stable performance; simple operation, easy to use; widely used in electronic / communications / semiconductor and other industries.
Film machine effect:
For the surface of the module evenly coated with a layer of glue to form the film.
The concept of film machine:
Flat type film machine to achieve the workpiece on the plane, the upper surface of the label and foil, such as boxes, books, plastic shell, etc., there are two methods of nap and suction, mainly based on efficiency, accuracy and bubble requirements for selection. Round bottle type film machine to achieve in the cylindrical, conical products on the circumferential surface of the label or foil, such as glass bottles, plastic bottles, etc., can be achieved circumference, semi-circumference, double-sided, circular positioning labeling and other functions, Type labeling and horizontal labeling in two ways. Side of the labeling machine to achieve in the workpiece side of the plane, side of the arc surface labeling or film, such as cosmetics flat bottles, boxes, etc., can be matching round bottle labeling equipment, while achieving round bottle labeling.
Safety procedures for film machine
1. Before starting the machine must check the equipment, fastening bolts are loose, and use thin water to wipe clean all the parts on the machine, after the re-tune the glue. Countertop is strictly prohibited to store any debris.
2. Turn off the power switch, check the start and stop of the host, the start and stop of the glue, the start and stop of the winding, the heating of the tunnel, the power switch of the ventilation and the pointer of the instrument are flexible, reliable and sensitive. After power, observe the operation of the equipment is normal, with or without abnormal sound and smell.
3. When the machine starts, you must grasp the drum speed adjustment, the drum temperature control, drying the temperature control. Strict control of the equipment speed, temperature.
4. After the start of the equipment should be run for 3 to 5 minutes, a few pieces of test film, check its requirements and then mass production without trial film, does not allow the official production.
5. Consciously do the "first three seized" and often self-test work piece quality. Can not be a self-test on the film in the end.
6. Operation can only be in the distance 30 cm away from the drum, can not enter the dangerous place. Is strictly prohibited side of the operation, while talking, the spirit is not concentrated, clothes and long hair must be tight, do not fly will be.
7. work is completed or failure, abnormal circumstances must first stop, report the competent. Apply for repair and hang up the repair card. It is forbidden to run for maintenance;
8. Turn off the power switch, clean up the work site. Material storage orderly, leaving a safe channel.